This section doesn’t currently include any content. Add content to this section using the sidebar.

Image caption appears here

Add your deal, information or promotional text

This section doesn’t currently include any content. Add content to this section using the sidebar.

Image caption appears here

Add your deal, information or promotional text

This section doesn’t currently include any content. Add content to this section using the sidebar.

Image caption appears here

Add your deal, information or promotional text

Precision cut skins for your 2023 HP Victus 15.

COMPATIBLE MODELS

  • 15-fa1093dx (13th gen Intel)

NOTES

  • The V logo is deeper than most logos on laptops, if you choose a solid skin (no logo cutout), you will see the V as an outline.
  • There is an undersized tolerance built into our lid design. The skin is intended to have a 0.25 to 0.5 mm gap between the edge of the device and the skin. This is to promote longevity and give a little "wiggle room" for installation. We show this in our photos.
  • The speaker grills on the bottom are not symmetrical.  This is the design of the device.  We have made our bottom skins symmetrical with a little extra buffer for aesthetics and longevity.  It is normal for spacing to be different on each side.  

HP Victus 15 (2023) Skins

The fingerprint icon indicates vinyls that may show fingerprints depending on the amount of oil on the persons skin and the angle the vinyl is viewed at. Matte textured skins will appear more as smudges while glossy skins will show a more defined fingerprint.

The difficulty icon indicates vinyl that is more difficult to work with. If you are new to vinyl or handling large pieces of vinyl, we recommend selecting another pattern. These will require a different installation technique to achieve good results - please watch the installation guide listed for help. For more information, see Our Vinyls page.

Covers The top of the lid and at least some of the sides. Requires extra attention to alignment. Some designs may require slight stretching to make installation easier. Logo will be cutout.

Covers The top of the lid and at least some of the sides. Requires extra attention to alignment. Some designs may require slight stretching to make installation easier.

Covers the top of the lid. Will not wrap around the sides. Logo will be cutout.

Covers the top of the lid. Will not wrap around the sides.

Covers the palm rest of the device.

Covers the back of the device only. Sides will NOT be covered.

Pattern

Advanced Installation Vinyls
Normal Installation Vinyls
Pattern Selected: None

Precision cut skins for your 2023 HP Victus 15.

COMPATIBLE MODELS

  • 15-fa1093dx (13th gen Intel)

NOTES

  • The V logo is deeper than most logos on laptops, if you choose a solid skin (no logo cutout), you will see the V as an outline.
  • There is an undersized tolerance built into our lid design. The skin is intended to have a 0.25 to 0.5 mm gap between the edge of the device and the skin. This is to promote longevity and give a little "wiggle room" for installation. We show this in our photos.
  • The speaker grills on the bottom are not symmetrical.  This is the design of the device.  We have made our bottom skins symmetrical with a little extra buffer for aesthetics and longevity.  It is normal for spacing to be different on each side.  

Search