This section doesn’t currently include any content. Add content to this section using the sidebar.

Image caption appears here

Add your deal, information or promotional text

This section doesn’t currently include any content. Add content to this section using the sidebar.

Image caption appears here

Add your deal, information or promotional text

This section doesn’t currently include any content. Add content to this section using the sidebar.

Image caption appears here

Add your deal, information or promotional text

Our Vinyls

Check out the vinyls we use for our skins below! All of these are actual photos taken of the materials.

Black Carbon Fiber

Manufacturer: 3M

Finish: Textured, Semi-Glossy

Installation Difficulty:

Adhesive:

Pressure Sensitive - Able to be gently placed on device and shifted around for alignment before tacking down.

Notes:

The texture resembles carbon fiber. This skin may leave adhesive on certain types of surfaces. This can be removed relatively easily with alcohol or a solvent like goo-gone. Please check your device finish before using alcohol or goo-gone.

Grey Carbon Fiber

Manufacturer: 3M

Finish: Textured, Semi-Glossy

Installation Difficulty:

Adhesive:

Pressure Sensitive - Able to be gently placed on device and shifted around for alignment before tacking down.

Notes:

The texture resembles carbon fiber. This skin may leave adhesive on certain types of surfaces. This can be removed relatively easily with alcohol or a solvent like goo-gone. Please check your device finish before using alcohol or goo-gone.

Brushed Black

Manufacturer: 3M or Avery

Finish: Textured, Shimmers

Installation Difficulty:

Adhesive:

Pressure Sensitive - Able to be gently placed on device and shifted around for alignment before tacking down.

Notes:

This vinyl is more likely to show surface irregularities due to thinness. It can tear along the texture grain during removal - advise to pull back against grain for easier removal.

Brushed Aluminum

Manufacturer: 3M

Finish: Textured, Shimmers

Installation Difficulty:

Adhesive:

Pressure Sensitive - Able to be gently placed on device and shifted around for alignment before tacking down.

Notes:

This vinyl is more likely to show surface irregularities due to thinness. It can tear along the texture grain during removal - advise to pull back against grain for easier removal.

Brushed Steel

Manufacturer: 3M

Finish: Textured, Shimmers

Installation Difficulty:

Adhesive:

Pressure Sensitive - Able to be gently placed on device and shifted around for alignment before tacking down.

Notes:

This vinyl is more likely to show surface irregularities due to thinness. It can tear along the texture grain during removal - advise to pull back against grain for easier removal.

Black Honeycomb

Manufacturer: Hexis

Finish: Textured, Shimmers

Installation Difficulty:

Adhesive:

Contact/Heat Sensitive - Not able to be shifted around for alignment once on the device. Installation may require use of paper backing to work small sections of vinyl at a time for larger devices. If the vinyl is not adhering completely to device, tack down and apply a small amount of heat to vinyl to activate the adhesive.

Notes:

This is a hexagonal textured. It refracts light at different angles, which has a really neat shimmer effect as light moves across it. This skin is recommended for users who have experience installing vinyl. If you have issues with bubbles or adhesion, use moderate heat and re-tack. Heat will also shrink bubbles. Any bubbles that remain can be addressed with a pin.

Blue Honeycomb

Manufacturer: Oracal

Finish: Textured, Shimmers

Installation Difficulty:

BLUE_HONEYCOMB

Adhesive:

Contact/Heat Sensitive - Not able to be shifted around for alignment once on the device. Installation may require use of paper backing to work small sections of vinyl at a time for larger devices. If the vinyl is not adhering completely to device, tack down and apply a small amount of heat to vinyl to activate the adhesive.

Notes:

This is a hexagonal textured. It refracts light at different angles, which has a really neat shimmer effect as light moves across it. This skin is recommended for users who have experience installing vinyl. If you have issues with bubbles or adhesion, use moderate heat and re-tack. Heat will also shrink bubbles. Any bubbles that remain can be addressed with a pin.

Black Camo

Manufacturer: 3M

Finish: Textured, Non-Glossy

Installation Difficulty:

Adhesive:

Pressure Sensitive - Able to be gently placed on device and shifted around for alignment before tacking down.

Notes:

This skin may leave adhesive on certain types of surfaces. This can be removed relatively easily with alcohol or a solvent like goo-gone. Please check your device finish before using alcohol or goo-gone.

Black Leather

Manufacturer: Hexis

Finish: Textured, Semi-Glossy

Installation Difficulty:

BLACK_LEATHER

Adhesive:

Contact/Heat Sensitive - Not able to be shifted around for alignment once on the device. Installation may require use of paper backing to work small sections of vinyl at a time for larger devices. If the vinyl is not adhering completely to device, tack down and apply a small amount of heat to vinyl to activate the adhesive.

Notes:

This vinyl is thicker than others, and doesn't handle sharp corners well. Because of this, it is only offered on designs that are flat, or only slightly curved.

Black Matrix

Manufacturer: 3M

Finish: Textured, Non-Glossy

Installation Difficulty:

BLACK_MATRIX

Adhesive:

Pressure Sensitive - Able to be gently placed on device and shifted around for alignment before tacking down.

Notes:

The texture resembles carbon fiber. This skin may leave adhesive on certain types of surfaces. This can be removed relatively easily with alcohol or a solvent like goo-gone. Please check your device finish before using alcohol or goo-gone. The texture is non-reflective and gives the device a patterned, matte look and feel.

Forged Carbon

Manufacturer: Hexis

Finish: Textured, Shimmers

Installation Difficulty:

FORGED_CARBON

Adhesive:

Contact/Heat Sensitive - Not able to be shifted around for alignment once on the device. Installation may require use of paper backing to work small sections of vinyl at a time for larger devices. If the vinyl is not adhering completely to device, tack down and apply a small amount of heat to vinyl to activate the adhesive.

Notes:

This is a randomized textured vinyl. It refracts light at different angles, which has a really neat shimmer effect as light moves across it. If the vinyl is not adhering completely to device, tack down and apply a small amount of heat to vinyl to activate the adhesive.

This skin is recommended for users who have experience installing vinyl. If you have issues with bubbles or adhesion, use moderate heat and re-tack. Heat will also shrink bubbles. Any bubbles that remain can be addressed with a pin.

Galactic Iridescent

Manufacturer: Hexis

Finish: Glossy

Installation Difficulty:

Adhesive:

Contact/Heat Sensitive - Not able to be shifted around for alignment once on the device. Installation may require use of paper backing to work small sections of vinyl at a time for larger devices. If the vinyl is not adhering completely to device, tack down and apply a small amount of heat to vinyl to activate the adhesive.

Notes:

This is a blueish vinyl with iridescent / color shifting properties. If the vinyl is not adhering completely to device, tack down and apply a small amount of heat to vinyl to activate the adhesive.

This skin is recommended for users who have experience installing vinyl. If you have issues with bubbles or adhesion, use moderate heat and re-tack.

Pink Glitterbomb

Manufacturer: Hexis

Finish: Smooth, Glossy

Installation Difficulty:

Adhesive:

Contact/Heat Sensitive - Not able to be shifted around for alignment once on the device. Installation may require use of paper backing to work small sections of vinyl at a time for larger devices. If the vinyl is not adhering completely to device, tack down and apply a small amount of heat to vinyl to activate the adhesive.

Notes:

This is a pink vinyl with glitter in it. If the vinyl is not adhering completely to device, tack down and apply a small amount of heat to vinyl to activate the adhesive.

This skin is recommended for users who have experience installing vinyl. If you have issues with bubbles or adhesion, use moderate heat and re-tack.

Matte Blue Metallic

Manufacturer: 3M

Finish: Smooth, Matte

Installation Difficulty:

Adhesive:

Pressure Sensitive - Able to be gently placed on device and shifted around for alignment before tacking down.

Notes:

This vinyl has a slightly metallic look to it.

Matte Red Metallic

Manufacturer: 3M

Finish: Smooth, Matte

Installation Difficulty:

Adhesive:

Pressure Sensitive - Able to be gently placed on device and shifted around for alignment before tacking down.

Notes:

This vinyl has a slightly metallic look to it.

Matte Black

Manufacturer: 3M

Finish: Smooth, Matte

Installation Difficulty:

MATTE_BLACK

Adhesive:

Pressure Sensitive - Able to be gently placed on device and shifted around for alignment before tacking down.

Notes:

This vinyl is more likely to show surface irregularities due to thinness.

Charcoal Grey

Manufacturer: Avery

Finish: Smooth, Matte

Installation Difficulty:

CHARCOAL_GREY

Adhesive:

Pressure Sensitive - Able to be gently placed on device and shifted around for alignment before tacking down.

Notes:

This vinyl is more likely to show surface irregularities due to thinness.

Frosty Vanilla

Manufacturer: 3M

Finish: Smooth, Semi-Glossy

Installation Difficulty:

Adhesive:

Pressure Sensitive - Able to be gently placed on device and shifted around for alignment before tacking down.

Notes:

This vinyl has flakes in it that sparkle in the light.

Prism

Manufacturer: 3M

Finish: Smooth, Semi-Glossy

Installation Difficulty:

Adhesive:

Pressure Sensitive - Able to be gently placed on device and shifted around for alignment before tacking down.

Notes:

This produces a prism-like shimmer effect when viewed at angles in light.

Satin White

Manufacturer: 3M

Finish: Smooth, Satin (slight sheen)

Installation Difficulty:

Adhesive:

Pressure Sensitive - Able to be gently placed on device and shifted around for alignment before tacking down.

Notes:

N/A

Satin Aluminum

Manufacturer: 3M

Finish: Smooth, Satin (slight sheen)

Installation Difficulty:

Adhesive:

Pressure Sensitive - Able to be gently placed on device and shifted around for alignment before tacking down.

Notes:

Has a slight metallic silver/aluminum effect.

Metallic Purple

Manufacturer: Avery

Finish: Smooth, Satin (slight sheen)

Installation Difficulty:

METALLIC_PURPLE

Adhesive:

Pressure Sensitive - Able to be gently placed on device and shifted around for alignment before tacking down.

Notes:

This vinyl is more likely to show surface irregularities due to thinness.

Search