Eluktronics Mech 16 GP (2023) Skins - M2 Skins

This section doesn’t currently include any content. Add content to this section using the sidebar.

Image caption appears here

Add your deal, information or promotional text

This section doesn’t currently include any content. Add content to this section using the sidebar.

Image caption appears here

Add your deal, information or promotional text

This section doesn’t currently include any content. Add content to this section using the sidebar.

Image caption appears here

Add your deal, information or promotional text

Precision cut skins for your 2023 Eluktronics Mech 16 GP

COMPATIBLE MODELS

  • MECH 16 GP

NOTES

  • Some of the 3M vinyls leave a little adhesive due to the surface finish of the Mech. This was easily wiped off with a microfiber towel.

Installation Guides / Videos

Wrap Around / Top Lid Install
Advanced Top Lid Install
Full Interior / Palm Rest Install
Advanced Palm Rest Install
Bottom Install

Eluktronics Mech 16 GP (2023) Skins

The fingerprint icon indicates vinyls that may show fingerprints depending on the amount of oil on the persons skin and the angle the vinyl is viewed at. Matte textured skins will appear more as smudges while glossy skins will show a more defined fingerprint.

The difficulty icon indicates vinyl that is more difficult to work with. If you are new to vinyl or handling large pieces of vinyl, we recommend selecting another pattern. These will require a different installation technique to achieve good results - please watch the installation guide listed for help. For more information, see Our Vinyls page.

The peel icon indicates a vinyl that comes from the factory with a protective clear layer installed. This layer is intended to be removed after installation and will make the vinyl appear cloudy/scratched. If your design has transfer tape installed (typically for a logo), we have likely already removed this layer.

Covers The top of the lid and at least some of the sides. Requires extra attention to alignment. Some designs may require slight stretching to make installation easier.

Covers the top of the lid. Will not wrap around the sides.

Covers the palm rest and some or all areas around the keyboard of the device.

Covers the palm rest of the device.

Covers the back of the device only. Sides will NOT be covered.

Pattern

Patterns Description Here
Advanced Installation Vinyls
Normal Installation Vinyls
Pattern Selected: None

Precision cut skins for your 2023 Eluktronics Mech 16 GP

COMPATIBLE MODELS

  • MECH 16 GP

NOTES

  • Some of the 3M vinyls leave a little adhesive due to the surface finish of the Mech. This was easily wiped off with a microfiber towel.

Installation Guides / Videos

Wrap Around / Top Lid Install
Advanced Top Lid Install
Full Interior / Palm Rest Install
Advanced Palm Rest Install
Bottom Install

Search