Check out the vinyls we use for our skins below!  All of these are actual photos taken of the materials.  

 Black Carbon Fiber
Black_Carbon_Fiber

Manufacturer: 3M

Finish: Textured, Semi-Glossy

Adhesive: Pressure Sensitive - Able to be gently placed on device and shifted around for alignment before tacking down.

Installation Difficulty: **

Notes: The texture resembles carbon fiber. This skin may leave adhesive on certain types of surfaces.  This can be removed relatively easily with alcohol or a solvent like goo-gone. Please check your device finish before using alcohol or goo-gone. 

 White Carbon Fiber
White_Carbon_Fiber

Manufacturer: 3M

Finish: Textured, Semi-Glossy

Adhesive: Pressure Sensitive - Able to be gently placed on device and shifted around for alignment before tacking down.

Installation Difficulty: **

Notes: The texture resembles carbon fiber.

 Grey Carbon Fiber
Grey_Carbon_Fiber

Manufacturer: 3M

Finish: Textured, Non-Glossy

Adhesive: Pressure Sensitive - Able to be gently placed on device and shifted around for alignment before tacking down.

Installation Difficulty: **

Notes: The texture resembles carbon fiber.

 Brushed Black
Black_Brushed

Manufacturer: 3M or Avery

Finish: Textured, Shimmers

Adhesive: Pressure Sensitive - Able to be gently placed on device and shifted around for alignment before tacking down.

Installation Difficulty: *

Notes: This vinyl is more likely to show surface irregularities due to thinness. It can tear along the texture grain during removal - advise to pull back against grain for easier removal.

 Brushed Aluminum
Brushed_Aluminum

Manufacturer: 3M

Finish: Textured, Shimmers

Adhesive: Pressure Sensitive - Able to be gently placed on device and shifted around for alignment before tacking down.

Installation Difficulty: *

Notes: This vinyl is more likely to show surface irregularities due to thinness. It can tear along the texture grain during removal - advise to pull back against grain for easier removal.

 Brushed Steel
Brushed_Steel

Manufacturer: 3M

Finish: Textured, Shimmers

Adhesive: Pressure Sensitive - Able to be gently placed on device and shifted around for alignment before tacking down.

Installation Difficulty: *

Notes: This vinyl is more likely to show surface irregularities due to thinness. It can tear along the texture grain during removal - advise to pull back against grain for easier removal.

 Black Honeycomb
Black_Honeycomb

Manufacturer: Oracal

Finish: Textured, Shimmers

Adhesive: Contact/Heat Sensitive - Not able to be shifted around for alignment once on the device. Installation may require use of paper backing to work small sections of vinyl at a time for larger devices. If the vinyl is not adhering completely to device, tack down and apply a small amount of heat to vinyl to activate the adhesive.

Installation Difficulty: ***

Notes: This is a hexagonal textured. It refracts light at different angles, which has a really neat shimmer effect as light moves across it.

This skin is recommended for users who have experience installing vinyl. If you have issues with bubbles or adhesion, use moderate heat and re-tack. Heat will also shrink bubbles. Any bubbles that remain can be addressed with a pin.

 Blue Honeycomb
Blue_Honeycomb

Manufacturer: Oracal

Finish: Textured, Shimmers

Adhesive: Contact/Heat Sensitive - Not able to be shifted around for alignment once on the device. Installation may require use of paper backing to work small sections of vinyl at a time for larger devices. If the vinyl is not adhering completely to device, tack down and apply a small amount of heat to vinyl to activate the adhesive.

Installation Difficulty: ***

Notes: This is a hexagonal textured. It refracts light at different angles, which has a really neat shimmer effect as light moves across it.

This skin is recommended for users who have experience installing vinyl. If you have issues with bubbles or adhesion, use moderate heat and re-tack. Heat will also shrink bubbles. Any bubbles that remain can be addressed with a pin.

 Silver Honeycomb
Silver_Honeycomb

Manufacturer: Oracal

Finish: Textured, Shimmers

Adhesive: Contact/Heat Sensitive - Not able to be shifted around for alignment once on the device. Installation may require use of paper backing to work small sections of vinyl at a time for larger devices.

Installation Difficulty: ***

Notes: This is a hexagonal textured. It refracts light at different angles, which has a really neat shimmer effect as light moves across it. If the vinyl is not adhering completely to device, tack down and apply a small amount of heat to vinyl to activate the adhesive.

This skin is recommended for users who have experience installing vinyl. If you have issues with bubbles or adhesion, use moderate heat and re-tack. Heat will also shrink bubbles. Any bubbles that remain can be addressed with a pin.

 Black Camo
Black_Camo

Manufacturer: 3M

Finish: Textured, Non-Glossy

Adhesive: Pressure Sensitive - Able to be gently placed on device and shifted around for alignment before tacking down.

Installation Difficulty: *

Notes: This skin may leave adhesive on certain types of surfaces.  This can be removed relatively easily with alcohol or a solvent like goo-gone. Please check your device finish before using alcohol or goo-gone. 

 Black Leather
Black_Leather

Manufacturer: Hexis

Finish: Textured, Semi-Glossy

Adhesive: Contact Sensitive - Not able to be shifted around for alignment once on the device. Installation may require use of paper backing to work small sections of vinyl at a time for larger devices.

Installation Difficulty: ***

Notes: This vinyl is thicker than others, and doesn't handle sharp corners well. Because of this, it is only offered on designs that are flat, or only slightly curved.

 Black Matrix
Black_Matrix

Manufacturer: 3M

Finish: Textured, Non-Glossy

Adhesive: Pressure Sensitive - Able to be gently placed on device and shifted around for alignment before tacking down.

Installation Difficulty: *

Notes: This is a soft textured vinyl offered by 3M.  This skin may leave adhesive on certain types of surfaces.  This can be removed relatively easily with alcohol or a solvent like goo-gone. Please check your device finish before using alcohol or goo-gone. The texture is non-reflective and gives the device a patterned, matte look and feel.

 Forged Carbon
Forged_Carbon

Manufacturer: Hexis

Finish: Textured, Shimmers

Adhesive: Contact/Heat Sensitive - Not able to be shifted around for alignment once on the device. Installation may require use of paper backing to work small sections of vinyl at a time for larger devices.

Installation Difficulty: ***

Notes: This is a randomized textured vinyl. It refracts light at different angles, which has a really neat shimmer effect as light moves across it. If the vinyl is not adhering completely to device, tack down and apply a small amount of heat to vinyl to activate the adhesive.

This skin is recommended for users who have experience installing vinyl. If you have issues with bubbles or adhesion, use moderate heat and re-tack. Heat will also shrink bubbles. Any bubbles that remain can be addressed with a pin.

 Caribbean Blue (Discontinued)
Caribbean_Blue

Manufacturer: 3M

Finish: Smooth, Color Shifts

Adhesive: Pressure Sensitive - Able to be gently placed on device and shifted around for alignment before tacking down.

Installation Difficulty: *

Notes: This is a smooth vinyl offered by 3M.  This is part of their color shifting offerings and will show different colors at different angles of light.

 Deep Blue (Discontinued)
Deep_Blue

Manufacturer: 3M

Finish: Smooth, Glossy

Adhesive: Pressure Sensitive - Able to be gently placed on device and shifted around for alignment before tacking down.

Installation Difficulty: *

Notes: This vinyl ships with a clear protective layer which should be removed after installation.

 Deep Red (Discontinued)
Deep_Red

Manufacturer: 3M

Finish: Smooth, Glossy

Adhesive: Pressure Sensitive - Able to be gently placed on device and shifted around for alignment before tacking down.

Installation Difficulty: *

Notes: This vinyl ships with a clear protective layer which should be removed after installation.

 Matte Red Metallic
Matte_Red_Metallic

Manufacturer: 3M

Finish: Smooth, Matte

Adhesive: Pressure Sensitive - Able to be gently placed on device and shifted around for alignment before tacking down.

Installation Difficulty: *

Notes: This vinyl has a metallic look to it.

 Frosty Vanilla
Frosty_Vanilla

Manufacturer: 3M

Finish: Smooth, Glossy

Adhesive: Pressure Sensitive - Able to be gently placed on device and shifted around for alignment before tacking down.

Installation Difficulty: *

Notes: This vinyl has flakes in it that sparkle in the light.

 Galaxy Black
Galaxy_Black

Manufacturer: 3M

Finish: Smooth, Glossy

Adhesive: Pressure Sensitive - Able to be gently placed on device and shifted around for alignment before tacking down.

Installation Difficulty: *

Notes: This vinyl ships with a clear protective layer which should be removed after installation.

 Prism
prism

Manufacturer: 3M

Finish: Smooth, Non-Glossy

Adhesive: Pressure Sensitive - Able to be gently placed on device and shifted around for alignment before tacking down.

Installation Difficulty: *

Notes: This produces a prism-like shimmer effect when viewed at angles in light.

 Charcoal Grey
Charcoal_Grey

Manufacturer: Avery

Finish: Smooth, Matte

Adhesive: Pressure Sensitive - Able to be gently placed on device and shifted around for alignment before tacking down.

Installation Difficulty: *

Notes: This color is close to the Asus G14/G15 Grey.

 Matte White (Replaced by Satin White)
Matte_White

Manufacturer: 3M

Finish: Smooth, Matte

Adhesive: Pressure Sensitive - Able to be gently placed on device and shifted around for alignment before tacking down.

Installation Difficulty: *

Notes: This vinyl is more likely to show surface irregularities due to thinness.

 Satin White
Matte_White

Manufacturer: 3M

Finish: Smooth, Satin (slight sheen)

Adhesive: Pressure Sensitive - Able to be gently placed on device and shifted around for alignment before tacking down.

Installation Difficulty: *

Notes: This vinyl is more likely to show surface irregularities due to thinness.

 Matte Black
Matte_Black

Manufacturer: 3M

Finish: Smooth, Matte

Adhesive: Pressure Sensitive - Able to be gently placed on device and shifted around for alignment before tacking down.

Installation Difficulty: *

Notes: This vinyl is more likely to show surface irregularities due to thinness.

 Simple Silver
Simple_Silver

Manufacturer: Avery

Finish: Smooth, Matte

Adhesive: Pressure Sensitive - Able to be gently placed on device and shifted around for alignment before tacking down.

Installation Difficulty: *

Notes: This color is close to the Asus G14 Silver."

 Satin Aluminum
Satin_Aluminum

Manufacturer: Avery

Finish: Smooth, Satin (slight sheen)

Adhesive: Pressure Sensitive - Able to be gently placed on device and shifted around for alignment before tacking down.

Installation Difficulty: *

Notes: Has a slight metallic silver/aluminum effect.

 Metallic Purple
Metallic_Purple

Manufacturer: Avery

Finish: Smooth, Semi-Glossy

Adhesive: Pressure Sensitive - Able to be gently placed on device and shifted around for alignment before tacking down.

Installation Difficulty: *

Notes: This vinyl has a metallic look to it.

-->